Payment & Shipping Terms:
|Power:||18W||Housing Color:||White Black|
Square Dimmable LED Panel Light Ceiling Mounted SMD2835 0-10V Black Aluminum
0-10V dimmable led panel light is a type which use 0-10V dimmable led driver, it is different with triac dimmable, the features of 0-10V dimmable led drivers are:
1. Integrate three dimming functions(1-10V or PWM signal or resistor)
2. Compatible with 0-10V and 1-10V dimming function
3. International universal input voltage 90～265VAC
4. With active PFC function
5. Protection type: short circuit / over current / over voltage
With this 0-10V dimmable led driver, our led panel light become dimmable led panel light, it can be installed into the ceiling, it is ceiling mounted, or recessed mounted. We use SMD2835 led chips, high lumen with high CRI. The square housing can make black color and other color, such as sliver, bronze.
Housing material is aluminum, which is good for heat dissipation.
1. Use slap-up import material
2. Saving energy up to 50%, replace the energy saving lamp
3. Special high-quality chips, more high intensity, less light decline and longer life more than 60, 000h
4. Special aluminum base board. Heat dispel is double than the common one
5. Super-thin design. Only 12mm thick;
6. No UV and IR radiation.
7. Applying the international patent and have the CE RoHS Certificationand the test Report.
|LED Brand||Taiwan Epistar|
|Lumen||1550LM ± 100 LM|
|Color Rendering Index||80RA|
4. Technical data:
LED Chip: SMD2835
LED Type: 0.2W
LED Lumen: 24-26LM
CCT: 3000K / 4000K /6000K
Lumen: 1550LM ± 100 LM
Color Rendering Index: 80RA
1. Home: Living room, Kitchen, Bedroom, Bathroom and etc..
2. Commercial: Hotel, Meeting room, Office, Stair passageway, Lobby and etc..
6. Quality Control Capacity:
A. QC Team: 8 persons.
B. Integrated QC system is implemented in every aspect of production for 4 times strictly check. Raw materials-during productive process-finished products-after aging before pack( one by one)
C. More than 200square meters aging room for each goods aging 24hours
1. The power must be turned off during installation. Do not install it with electricity.
2. The product must be connected to a matching constant current drive power source before it can be used normally. If the driver is DC24V, please notice that the DC24V input of the constant current drive power source must be connected with a power adapter and cannot be directly connected to the mains. If the driver is AC85-265V, then can be directly connected to the mains.
3. When selecting the power adapter, the power adapter power should have a certain margin. The total power of the fixture divided by 0.8 is the output power of the power adapter to ensure the long-term stability and life of the power adapter.
Contact Person: Sandy