Smd2835 Led Corn Light E27 High Safety Factor With 30000 Hours Long Lifespan

Product Description

Energy Saving LED Bulb 24W LED Corn Light SMD2835 E27 B22 2150LM 80Ra 30000 Hours

1. Advantages:

1. To protect eyesight: DC drive, no flicker (ordinary lights are AC drive, it will inevitably produce strobe).
2. High light efficiency: a company's highest light efficiency in the laboratory has reached 260lm / W, while the market's single high-power LED has also exceeded 100lm / W, made of LED energy-saving lamps, due to the loss of power efficiency, lampshade Optical loss, the actual efficiency of 60lm / W, and incandescent lamp is only about 15lm / W, good quality energy-saving lamps in the 60lm / W or so, so in general, LED energy-saving lighting effects and energy-saving lamps flat or slightly better . (May 2011 data)
3. High safety factor: the required voltage, current is small, the safety hazard is small, in the mine and other dangerous places.
4. Large market potential: low voltage, DC power supply, battery, solar power supply, power shortage, low power facilities in remote mountain areas and field lighting.

2. Technical Data Sheet:

3. Description:

Led corn light is an independent light source led lighting, because the led light beads maximum luminous angle of 120 degrees, taking into account the uniform light, designed to 360 degrees light, its shape is like a corn cob, especially known as led corn light.
Led light source is a DC-driven ultra-low power device, shock, impact resistance, no heat radiation, safe, stable, reliable, without considering heat dissipation, long life.
The lamp body is compact, easy to install; trendy style, sophisticated technology, product serialization. The LED light source has been fully utilized for energy saving and environmental protection, and does not generate any waste. It is the best product to replace traditional light sources.

4. Installation:

1. Please cut off the main power and moving out the old lamp, meanwhile, please ensure your hands are dry. And there must be a person to watch out in case of any danger.
2. Please install our LED filament bulb, the socket must match bulb's base. If the socket is E27, then make sure you are installing E27 base bulbs, the wrong base and socket will cause short circuit.
3. Please carefully check the installation again to make sure everything is ok, then switch on. Finally bulb will show a nice lighting performance.